iVAC Pneumatic Switch Box - 230V 13A UK

SKU: PSB24013_UK
Price:
inc VAT.
£170.40
Line
exc VAT.
£142.00
Stock:
Sold out

This iVAC PSB is an intelligent controller that switches your vacuum on and off automatically - as you use your air powered tool.
Air flow to your air tool is routed through the PSB and the air flow sensor detects when your air tool is in use. Your vacuum can now be controlled automatically.
Optimise your dust collection and appreciate increased convenience - the iVAC PSB Switch Box controls your vacuum automatically, on demand.
With this easy-to-use vacuum switch you'll be amazed at how much cleaner air tool work can be. Never forget to turn your vacuum on again!
Dust and debris is collected more efficiently, airborne dust is minimised and clean-up is much easier.

  • Automated dust control - for your health, safety and convenience
  • Use with any Vacuum - up to 2900 watts power rating
  • Manual option for added convenience and remote switching
  • 4 fixing tabs, Mount on your wall, bench or vacuum caddy
  • Earth terminal provided for grounding accessories
  • User selectable, turn ON and OFF delays
  • Use less power - your vacuum is only ON when required
  • Reduced noise - your vacuum turns OFF when not required
  • Rest your vacuum motor - avoid overheating and wear
  • The Intelligent electronics control a powerful, heavy duty relay
  • Designed & Engineered in Canada

For UK, 13A - BS1363 plugs and connectors
220 - 240V 50/60 Hz AC
Maximum switching load is 13A - 2900watts
Air tool AUTO switching threshold is approximately 4 SCFM at 90 psig
Air line connections are 1/2" NPT (BSP compatible)
ON delay selectable: 0, 0.5, 1 or 2 seconds
OFF delay selectable: 0, 1, 2, 4, 6, 8, 12 or 20 seconds
Circuit breaker is 13A - 'B' type, user resettable
Suitable for continuous operation
Housing - ABS, fire retardant
Housing - 128mm wide. 177mm high (incl fixing tabs). 56mm deep. 580g
Approvals - CE, RoHS
Protection - IP20 - Class I

Must be mounted horizontal for correct and reliable operation
Not suitable for NVR (no-volt-release / magnetic switch) protected vacuums

Do not exceed the maximum total load of 13A (2900watts) This is the load of your vacuum

The iVAC PSB Switch Box is an intelligent controller for a vacuum. The iVAC PSB enables the automatic switching of a vacuum for your health, enhanced safety, convenience, and energy efficiency. The iVAC Switch Box unit is intended to be used with an air power tool such as a sander and an associated vacuum. The air flow sensing, electronic delay and overrun optimise your dust collection and power consumption.

A vacuum connected to the iVAC PSB is controlled by 3 modes: AUTO - 0 - 1.
AUTO (automatic): When the connected air tool is switched on the vacuum will automatically switch on (after a selectable delay). When the air tool is switched off the vacuum will deny to run (for a selectable period) then automatically switch off. This overrun function is to purge dust and debris from your air tool, workstation and pipes.
1 (ON): The vacuum is permanently on regardless of the state of the air tool.
0 (OFF): The vacuum is permanently off regardless of the state of the air tool.

The iVAC PSB is guaranteed against defects in material and workmanship, under normal usage, for one year from the date of purchase. This guarantee is not transferable and does not effect your statutory rights. This guarantee does not apply in cases of improper use, negligence, lack of maintenance or accidental damage. Under the terms of this guarantee a faulty iVAC PSB will either be repaired or replaced free of charge. Liability is limited to the iVAC PSB only, no other costs will be reimbursed. This guarantee does not confer any rights other than those expressly set out above.

Payment & Security

Mastercard PayPal Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed